This is a brand new ISA Enterprise server that was installed today with 2 nics. Internal nic has 4 192.168.x networks.
Internal nic has a unique 192.168.x network that is not included in the range of the internal nic.
"The routing table for the network adapter Internal includes IP address ranges that are not defined in the array-level network External, to which it is bound. As a result, packets arriving at this network adapter from the IP address ranges listed below or sent to these IP address ranges via this network adapter will be dropped as spoofed. To resolve this issue, add the missing IP address ranges to the array network." It says to resolve this issue, add the missing IP address ranges to the array network.
It is more than just an error message, it is blocking client access to the ISA server.
I did a search on this error and found several posts about it, but didn't see any that have instructions on the specific steps to add the missing address ranges.
I don't see any way to configure the External network in ISA.
How is the fixed (specific steps to commands)? For instance if the internal nic was configured for 192.168.0.x to 192.168.9.x and 192.168.12.x to 192.168.15.x and the external NIC was 192.168.200.15 with gateway of 192.168.200.1, what would the command be to fix this error.